Abstract
This document contains the instructions for preparing a camera-ready manuscript for the proceedings of CSSP-2015. The document itself conforms to its own specifications, and is therefore an example of what your manuscript should look like. These instructions should be used for both papers submitted for review and for final versions of accepted papers. Authors are asked to conform to all the directions re-ported in this document.
Credits
This document has been adapted from the instructions for ACL proceedings, including those for ACL-2012 by Maggie Li and Michael White, those from ACL-2010 by Jing-Shing Chang and Philipp Koehn, those for ACL-2008 by Johanna D. Moore, Simone Teufel, James Allan, and Sadaoki Furui, those for ACL-2005 by Hwee Tou Ng and Kemal Oflazer, those for ACL-2002 by Eugene Charniak and Dekang Lin, and earlier ACL and EACL formats. Those versions were written by several people, including John Chen, Henry S. Thompson and Donald Walker. Additional elements were taken from the formatting instructions of the International Joint Conference on Artificial Intelligence.
Introduction
The following instructions are directed to authors of papers submitted to CSSP-2015 or accepted for publication in its proceedings. All authors are required to adhere to these specifications. Authors are required to provide a Portable Document Format (PDF) version of their papers. The proceedings will be printed on A4 paper.
General Instructions
Manuscripts must be in two-column format. Exceptions to the two-column format include the title, authors’ names and complete addresses, which must be centered at the top of the first page, and any full-width figures or tables (see the guidelines in Subsection 3.5). Type single-spaced. Start all pages directly under the top margin. See the guidelines later regarding formatting the first page.
The manuscript should be printed single-sided and its length should not exceed the maximum page limit described in Section 5. Do not number the pages.
Electronically-available resources
A Microsoft Word template file (acl2013.dot) is also available at the same URL. If you will be using the Microsoft Word template, we suggest that you anonymize your source file so that the pdf produced does not retain your identity. This can be done by removing any personal information from your source document properties.
Format of Electronic Manuscript
For the production of the electronic manuscript you must use Adobe's Portable Document For-mat (PDF). This format can be generated from postscript files. On Linux/Unix systems, you can use ps2pdf for this purpose. In Microsoft Windows, you can use Adobe's Distiller, or if you have cygwin installed, you can use dvipdf or ps2pdf. Note that some word processing programs generate PDF which may not include all the necessary fonts (esp. tree diagrams, symbols). When you print or create the PDF file, there is usually an option in your printer setup to include none, all or just non-standard fonts. Please make sure that you select the option of including ALL the fonts. Be-fore sending it, test your PDF by printing it from a computer different from the one where it was created. Moreover, some word processor may generate very large postscript/PDF files, where each page is rendered as an image. Such images may reproduce poorly. In this case, try alternative ways to obtain the postscript and/or PDF. One way on some systems is to install a driver for a postscript printer, send your document to the printer specifying “Output to a file”, then convert the file to PDF.
It is of utmost importance to specify the A4 format (21 cm 29.7 cm) when formatting the paper. When working with dvips, for instance, one should specify -t a4.
Print-outs of the PDF file on A4 paper should be identical to the hardcopy version. If you cannot meet the above requirements about the production of your electronic submission, please contact the publication chairs above as soon as possible.
Layout
Format manuscripts two columns to a page, in the manner these instructions are formatted. The exact dimensions for a page on A4 paper are:
Left and right margins: 2.5 cm
Top margin: 2.5 cm
Bottom margin: 2.5 cm
Column width: 7.7 cm
Column height: 24.7 cm
Gap between columns: 0.6 cm
Papers should not be submitted on any other paper size. If you cannot meet the above requirements about the production of your electronic submission, please contact the publication chairs above as soon as possible.
Fonts
For reasons of uniformity, Adobe's Times Roman font should be used. In LATEX2e, this is accomplished by putting
\usepackage{times}
\usepackage{latexsym}
in the preamble. If Times Roman is unavailable, use Computer Modern Roman (LATEXe's default). Note that the latter is about 10% less dense than Adobe's Times Roman font.
|
Type of Text
|
Font Size
|
Style
|
|
paper title
|
15 pt
|
bold
|
|
author names
|
12 pt
|
bold
|
|
author affiliation
|
12 pt
|
|
|
the word “Abstract”
|
12 pt
|
bold
|
|
section titles
|
12 pt
|
bold
|
|
document text
|
11 pt
|
|
|
captions
|
11 pt
|
|
|
abstract text
|
10 pt
|
|
|
bibliography
|
10 pt
|
|
|
footnotes
|
9 pt
|
|
The First Page
Center the title across both columns. Use the two-column format only when you begin the abstract.
Title: Place the title centered at the top of the first page, in a 15-point bold font. (For a complete guide to font sizes and styles, see Table 1) Long titles should be typed on two lines without a blank line intervening. As reviewing will be double-blind, the submitted version of the papers should not include the authors’ names and affiliations.
Do not format title and section headings in all capitals as well except for proper names (such as ‘BLEU’) that are conventionally in all capitals.
Abstract: Type the abstract at the beginning of the first column. The width of the abstract text should be smaller than the width of the columns for the text in the body of the paper by about 0.6 cm on each side. Center the word Abstract in a 12 point bold font above the body of the abstract. The abstract should be a concise summary of the general thesis and conclusions of the paper. It should be no longer than 200 words.
Text: Begin typing the main body of the text immediately after the abstract, observing the two-column format as shown in the present document.
Indent when starting a new paragraph. Use 11 points for text and subsection headings, 12 points for section headings and 15 points for the title.
Sections
Headings: Type and label section and subsection headings in the style shown on the present document. Use numbered sections (Arabic numerals) in order to facilitate cross references. Number subsections with the section number and the subsection number separated by a dot, in Arabic numerals. Do not number subsubsections.
Citations: Citations within the text appear in parentheses as (Gusfield, 1997) or, if the author's name appears in the text itself, as Gusfield (1997). Append lowercase letters to the year in cases of ambiguities. Treat double authors by using both authors’ last names (e.g., (Aho and Ullman, 1972), but write as in (Chandra et al., 1981) when more than two authors are involved. Collapse multiple citations as in (Gusfield, 1997; Aho and Ullman, 1972). Also refrain from using full citations as sentence constituents. We suggest that instead of
“(Gusfield, 1997) showed that ...”
you use
“Gusfield (1997) showed that ...”
If you are using the provided LATEX2e and BibTEX style files, you can use the command \newcite to get “author (year)” citations.
As reviewing will be double-blind, the submitted version of the papers should not include the authors’ names and affiliations. Furthermore, self-references that reveal the author’s identity, e.g.,
“We previously showed (Gusfield,
1997) ...”
should be avoided. Instead, use citations such as
“Gusfield (1997) previously showed ... ”
Please do not use anonymous citations and do not include acknowledgements when submitting your papers. Papers that do not conform to these requirements may be rejected without review.
References: Gather the full set of references together under the heading References; place the section before any Appendices, unless they contain references. Arrange the references alphabetically by first author, rather than by order of occurrence in the text. Provide as complete a citation as possible, using a consistent format, such as the one for Computational Linguistics or the one in the Publication Manual of the American Psychological Association (American Psychological Association, 1983). Use of full names for authors rather than initials is preferred. A list of abbreviations for common computer science journals can be found in the ACM Computing Reviews (Association for Computing Machinery, 1983).
The LATEX2e and BibTEX style files provided roughly fit the American Psychological Association format, allowing regular citations, short citations and multiple citations as described above.
Appendices: Appendices, if any, directly follow the text and the references (but see above). Letter them in sequence and provide an informative title: Appendix A. Title of Appendix.
Acknowledgement sections should go as a last section immediately before the references. Do not number the acknowledgement section.
Footnotes
Footnotes: Put footnotes at the bottom of the page and use 9 points text. They may be numbered or referred to by asterisks or other symbols.1 Footnotes should be separated from the main text by a line.2
Graphics
Illustrations: Place figures, tables, and photo-graphs in the paper near where they are first discussed, rather than at the end, if possible. Wide illustrations may run across both columns. Color illustrations are discouraged, unless you have verified that they will be understandable when printed in black ink.
Captions: Provide a caption for every illustration; number each one sequentially in the form: “Figure 1. Caption of the Figure.” “Table 1. Caption of the Table.” Type the captions of the figures and tables below the body, using 11 point text.
Translation of non-English Terms
It is also advised to supplement non-English characters and terms with appropriate transliterations and/or translations since not all readers understand all such characters and terms. Inline transliteration or translation can be represented in the order of: original-form transliteration “translation”.
Length of Submission
Long papers may consist of up to 5 pages of content, plus one extra page for references. Papers that do not conform to the specified length and formatting requirements are subject to be rejected without review.
Acknowledgments
Do not number the acknowledgment section. Do not include this section when submitting your paper for review.
References
Alfred. V. Aho and Jeffrey D. Ullman. 1972. The Theory of Parsing, Translation and Compiling, volume 1. Prentice-Hall, Englewood Cliffs, NJ.
American Psychological Association. 1983. Publications Manual. American Psychological Association, Washington, DC.
Association for Computing Machinery. 1983. Computing Reviews, 24(11):503-512.
Ashok K. Chandra, Dexter C. Kozen, and Larry J.Stockmeyer. 1981. Alternation. Journal of the Association for Computing Machinery, 28(1):114-133.
Dan Gusfield. 1997. Algorithms on Strings, Trees and Sequences. Cambridge University Press, Cambridge, UK.
This is how a footnote should appear.
目前所在目录：/